11
WT07417X01
4-3. Product features
The table below summarizes the available functions and settings on the Web browser. Refer to the Web browser
instruction books (separate volume) for details.
Function Description
User's operation functions
Operation
*1
ON/OFF The ON/OFF operation can be performed collectively or for each group or block.
Operation mode
The operation mode can be switched collectively or for each group or block. (The
available operation modes depend on the unit model.)
Set temperature
The set temperature can be set collectively or for each group or block. (The
available set temperatures depend on the unit model.)
Air direction
The air direction can be changed collectively or for each group or block. (The
available air directions depend on the unit model.)
Fan speed
The fan speed can be changed collectively or for each group or block. (The number
of available fan speeds depend on the unit model.) Auto mode is available only on
the models that support Auto mode.
Fan speed
(LOSSNAY unit)
The fan speed (3 speeds and Auto) can be changed.
Fan mode (HWHP
unit)
The fan can be set to keep rotating even while the unit is stopped to avoid snow
accumulation on the fan guard during the winter.
Ventilation mode
(LOSSNAY unit)
The ventilation mode can be switched.
Interlocked ventilator
(LOSSNAY unit)
ON/OFF
Interlocked LOSSNAY units (if any) can be operated or stopped collectively or for
each group or block.
Prohibition of local
remote controller
operation
Some operations or settings from the local remote controllers can be prohibited
collectively or for each group or block.
Filter sign reset Filter sign can be reset collectively or for each group or block.
Schedule
Weekly, annual, and today’s schedules can be set collectively or for each group or
block.
Schedule (Available/
Not Avail.)
The scheduled operations can be enabled or disabled.
Malfunction reset Displayed errors can be reset.
Clear malfunction
log
Displayed unit errors and communication errors can be cleared.
External input
Using external contact signals, the following collective operations can be controlled:
Demand level, Emergency stop, ON/OFF operation, and Prohibit/Permit local
remote controller operation.
* A separately-sold external input/output adapter (PAC-YG10HA-E) is required.
* Connect the external input/output adapter to each AE-200/AE-50/EW-50.
Monitor
*1
Energy Use Status
Displays and compares the energy-control-related status, such as electric energy
consumption, operation time, and outdoor temperature, in a graph.
Ranking
Displays the rankings in electric energy consumption and the fan operation time of
given indoor units in a bar graph.
Target Value Setting
Sets the target electric energy consumption values for the entire system for the
current year, each month, each day of the week, and each block. The set values
will be displayed in the graph on the [Energy Use Status] screen and the [Ranking]
screen.
Peakcut Control
Status
Displays the average electric power consumption and the control level.
Condition List Displays the operation status of each group.
Prohibition of local
remote controller
operation
Displays the icon to indicate that the operation is prohibited by the EW-50.
Measurement List
Displays the readings of the temperature sensor, humidity sensor, and metering
device.
To Next Page
Loading...
