144
4. BASIC OPERATION
4.4 Frequently-used parameters (simple mode parameters)
4.4 Frequently-used parameters (simple mode
parameters)
Parameters that are frequently used for the FR-A800 series are grouped as simple mode parameters.
When Pr.160 User group read selection = "9999", only the simple mode parameters are displayed on the operation panel.
This section explains the simple mode parameters.
4.4.1 Simple mode parameter list
For simple variable-speed operation of the inverter, the initial values of the parameters may be used as they are. Set the
necessary parameters to meet the load and operational specifications. Parameter's setting, change and check can be made
on the operation panel (FR-DU08).
• Pr.160 User group read selection can narrow down the displayed parameters to only the simple mode parameters. (In the
initial setting, all parameters are displayed.) Set Pr.160 User group read selection as required. (To change the parameter
setting, refer to page 139.)
Pr.160 setting Description
9999 Only simple mode parameters are displayed.
0 (initial value)
All parameters (simple mode parameters and extended parameters)
are displayed.
1 Only parameters registered in user groups are displayed.
To Next Page
Loading...
Need help?
General
