260
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
9 Move and Compare – FNC 10 to FNC 19
9.7 FNC 16 – FMOV / Fill Move
2. 32-bit operation (DFMOV and DFMOVP)
The contents of [ +1, ] are transferred to "n" 32-bit devices starting from [ +1, ].
• The contents will be the same among all of "n" 32-bit devices.
• If the number of points specified by "n" exceeds the device number range, data is transferred within the possible
range.
• While the command input is OFF, the transfer destination [ +1, ] does not change.
• While the command input is ON, the data of the transfer source [ +1, ] does not change.
• When a constant (K) is specified as the transfer source [ +1, ], it is automatically converted into binary.
Program example
1. When writing specified data to two or more devices
S
S
D
D
D
D
S
S
S
S
X000
FNC 16
DFMOV
n
S
D
+1,
+1,
n
+3, +2
+5, +4
+7, +6
+9, +8
S
D
D
D
D
D
S
D
D
D
D
D
X000
FNC 16
FMOV
K 0 D 0 K 5
n
S
D
K 0
K 0
D 0
K 0
D 1
K 0
D 2
K 0
D 3
K 0
D 4
Before
execution
After
execution
K 3
……
K 0
K 5 K 0
K 65 K 0
K 7 K 0
K100
→
K 0
Values before execution are
shown as examples.
S
D
……
……
……
……
→
→
→
→
To Next Page
Loading...
