Mitsubishi Electric FX3U SERIES - Appendix A: Programming Tool Applicability and Version Upgrade History; Appendix A-1 Programming Tool Applicability; Appendix A-1-1 Programming Tool Applicability

891
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
A Programming Tool Applicability and Version Upgrade History
A-1 Programming Tool Applicability
31
FNC276-FNC279 Data Transfer 3
32
FNC280-FNC289 High-Speed Processing 2
33
FNC290-FNC299 Extension File Register
34
FNC300-FNC305 FX
3U
-CF-ADP
35
SFC•STL Programming
36
Interrupt Function
37
Special Device
38
Error Code
A
Version Up Information
B
Execution Times
Appendix A: Programming Tool Applicability and Version
Upgrade History
Appendix A-1 Programming Tool Applicability
Appendix A-1-1 Programming tool applicability
1. Applicable versions of programming tool
1) GX Works2
• GX Works2 Japanese version (SWDNC-GXW2-J) is applicable to FX
3G/FX3U/FX3UC PLCs from the following
versions.
a) FX
3G PLCs
b) FX
3U PLCs
c) FX
3UC PLCs
FX3G PLC version
Model name
(Media model name
is shown below.)
Applicable GX Works2
version
Remarks
Before Ver. 1.40
GX Works2
SWDNC-GXW2-J
Ver. 1.07H or later
• Model selection: FX3G
Ver. 1.40 Ver. 1.56J or later
FX3U PLC version
Model name
(Media model name
is shown below.)
Applicable GX Works2
version
Remarks
Before Ver. 2.70
GX Works2
SWDNC-GXW2-J
Ver. 1.07H or later
• Model selection: FX3U/FX3UCBefore Ver. 3.00 Ver. 1.45X or later
Ver. 3.00 Ver. 1.56J or later
FX3UC PLC version
Model name
(Media model name
is shown below.)
Applicable GX Works2
version
Remarks
Before Ver. 2.70
GX Works2
SWDNC-GXW2-J
Ver. 1.07H or later
• Model selection: FX3U/FX3UCBefore Ver. 3.00 Ver. 1.45X or later
Ver. 3.00 Ver. 1.56J or later