Mitsubishi Electric FX3U SERIES - Error Indication

881
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
38 Error Check Method and Error Code List
38.2 Error Code Check Method and Indication
31
FNC276-FNC279 Data Transfer 3
32
FNC280-FNC289 High-Speed Processing 2
33
FNC290-FNC299 Extension File Register
34
FNC300-FNC305 FX
3U
-CF-ADP
35
SFC•STL Programming
36
Interrupt Function
37
Special Device
38
Error Code
A
Version Up Information
B
Execution Times
38.2.3 Error indication
The table below shows the error expression in this manual, GX Works2, GX Developer, and display modules (FX3U-
7DM).
• Comparison between this manual and GX Works2.
• Comparison between this manual and GX Developer
• Comparison between this manual and the display module (FX
3U-7DM)
This manual
GX Works2
SWDNC-GXW2-E(Ver. 1.53F) SWDNC-GXW2-J(Ver. 1.50C)
I/O configuration error I/O Configuration Error
PLC hardware error PLC Hardware Error
PLC/PP communication error PLC/PP Communication Error
Serial communication error 1
[ch1]
Link Error
Serial communication error 2
[ch2]
Serial Communication Error 2[ch2]
Parameter error Parameter Error
Syntax error Syntax Error
Circuit error Ladder Error
Operation error Operation Error
Special block error Special Block Error
This manual
GX Developer
SWD5C-GPPW-E(Ver. 8.95Z) SWD5C-GPPW-J(Ver. 8.95Z)
I/O configuration error I/O config err
PLC hardware error PLC H/W error
PLC/PP communication error PLC/PP comm err
Serial communication error 1
[ch1]
Link error
Serial communication error 2
[ch2]
Link Error 2
Parameter error Param error
Syntax error Syntax error
Circuit error Ladder error
Operation error Operation err
Special block error SFB Error
This manual
Display module (FX3U-7DM)
Display in English Display in Japan
I/O configuration error I/O error
PLC hardware error PLC H/W error
PLC/PP communication error Comms. error
Serial communication error 1
[ch1]
Link error1
Serial communication error 2
[ch2]
Link error2
Parameter error Parameter error
Syntax error Grammer error
Circuit error Ladder error
Operation error Runtime error
Special block error SFB error