Mitsubishi Electric FX3U SERIES - Page 895

893
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
A Programming Tool Applicability and Version Upgrade History
A-1 Programming Tool Applicability
31
FNC276-FNC279 Data Transfer 3
32
FNC280-FNC289 High-Speed Processing 2
33
FNC290-FNC299 Extension File Register
34
FNC300-FNC305 FX
3U
-CF-ADP
35
SFC•STL Programming
36
Interrupt Function
37
Special Device
38
Error Code
A
Version Up Information
B
Execution Times
• GX Developer English version (SWD5C-GPPW-E) is applicable to FX3G/FX3U/FX3UC PLCs from the following
versions.
a) FX
3G PLCs
b) FX
3U PLCs
c) FX
3UC PLCs
*1. For Ver. 8.24A of GX Developer, the PLC type is FX3UC.
*2. Ver. 8.89T and later versions support the baud rate "38400 bps" in the communication setting for RS
and RS2 instructions, inverter communication and computer link.
3) FX-30P
FX-30P is applicable to FX
3G, FX3U and FX3UC PLCs starting with the following version:
a) FX
3G PLCs
b) FX
3U PLCs
c) FX
3UC PLCs
FX3G PLC version
Model name
(Media model name
is shown below.)
Applicable GX Developer
version
Remarks
Before Ver. 1.10
GX Developer
SWD5C-GPPW-E
Ver. 8.72A or later
• Model selection: FX3G
Ver. 1.10 Ver. 8.78G or later
FX3U PLC version
Model name
(Media model name
is shown below.)
Applicable GX Developer
version
Remarks
Before Ver. 2.30
GX Developer
SWD5C-GPPW-E
Ver. 8.24A or later
• Model selection: FX3U(C)
*1
Before Ver. 2.41 Ver. 8.29F or later
• Model selection: FX3U(C)
Before Ver. 2.61
Ver. 8.29F or later
*2
Ver. 2.61
Ver. 8.82L or later
*2
FX3UC PLC version
Model name
(Media model name
is shown below.)
Applicable GX Developer
version
Remarks
Before Ver. 2.20
GX Developer
SWD5C-GPPW-E
Ver. 8.18U or later • Model selection: FX3U(C)
Before Ver. 2.30 Ver. 8.24A or later
• Model selection: FX3U(C)
*1
Before Ver. 2.41 Ver. 8.29F or later
• Model selection: FX3U(C)
Before Ver. 2.53
Ver. 8.29F or later
*2
Before Ver. 2.61
Ver. 8.68W or later
*2
Ver. 2.61
Ver. 8.82L or later
*2
FX3G PLC version Model name Applicable FX-30P version Remarks
Before Ver. 1.10
FX-30P Ver. 1.00 or later
FX-30P (from first version) supports
FX
3G PLCs (Ver.1.10 or later).
Ver. 1.10
FX3U PLC version Model name Applicable FX-30P version Remarks
Before Ver. 2.41
FX-30P
Ver. 1.00 or later
Ver. 2.70 Ver. 1.20 or later
FX3UC PLC
version
Model name Applicable FX-30P version Remarks
Before Ver. 2.41
FX-30P
Ver. 1.00 or later
Ver. 2.70 Ver. 1.20 or later