928
FX3G/FX3U/FX3UC Series Programmable Controllers
Programming Manual - Basic & Applied Instruction Edition
B Instruction Execution Time
B-5 Execution Time of Pulse Generation Instruction P in Each Applied Instruction
•FX3G PLCs (Extension mode)
Applied instruction Execution time Remarks
MOV instruction (FNC 12)
Execution time at rising edge of input: Execution time in ON status = 5.43 μs
Non-execution time: Execution time in OFF status = 0.81 μs
BCD instruction (FNC 18)
Execution time at rising edge of input: Execution time in ON status = 5.42 μs
Non-execution time: Execution time in OFF status = 0.81 μs
BIN instruction (FNC 19)
Execution time at rising edge of input: Execution time in ON status = 5.21 μs
Non-execution time: Execution time in OFF status = 0.81 μs
ADD instruction (FNC 20)
Execution time at rising edge of input: Execution time in ON status = 6.68 μs
Non-execution time: Execution time in OFF status = 0.81 μs
SUB instruction (FNC 21)
Execution time at rising edge of input: Execution time in ON status = 6.78 μs
Non-execution time: Execution time in OFF status = 0.81 μs
MUL instruction (FNC 22)
Execution time at rising edge of input: Execution time in ON status = 7.24 μs
Non-execution time: Execution time in OFF status = 0.81 μs
DIV instruction (FNC 23)
Execution time at rising edge of input: Execution time in ON status = 7.44 μs
Non-execution time: Execution time in OFF status = 0.81 μs
INC instruction (FNC 24)
Execution time at rising edge of input: Execution time in ON status = 3.49 μs
Non-execution time: Execution time in OFF status = 0.81 μs
DEC instruction (FNC 25)
Execution time at rising edge of input: Execution time in ON status = 3.49 μs
Non-execution time: Execution time in OFF status = 0.81 μs
WAND instruction (FNC 26)
Execution time at rising edge of input: Execution time in ON status = 6.81 μs
Non-execution time: Execution time in OFF status = 0.81 μs
WOR instruction (FNC 27)
Execution time at rising edge of input: Execution time in ON status = 6.81 μs
Non-execution time: Execution time in OFF status = 0.81 μs
WXOR instruction (FNC 28)
Execution time at rising edge of input: Execution time in ON status = 6.81 μs
Non-execution time: Execution time in OFF status = 0.81 μs
Other applied instructions
Execution time at rising edge of input: Execution time in ON status + 0.7 μs
Non-execution time: Execution time in OFF status + 0.6 μs
To Next Page
Loading...
