EasyManua.ls Logo

Mitsubishi Electric FX5-ENET - Page 82

Mitsubishi Electric FX5-ENET
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
80
APPX
Appendix 4 Buffer Memory
CCIEF Basic each status
CCIEF Basic each status (Un\G4160)
Each status of CC-Link IE Field Network Basic is stored.
Diagnostic information display request
Diagnostic information display request (Un\G4162)
Reads the diagnostic information of the slave station that is specified by the 'Diagnostic request information' (Un\G4127) is
read to Un\G4128 to Un\G4159 after execution of the END instruction of the scan where bit 0 turns OFF and ON.
0 is stored if the setting of the diagnostic information is completed during the END process.
Diagnostic information display request execution status
Diagnostic information display request execution status (Un\G4163)
Stores the execution status of the diagnostic information display following the 'Diagnostic information display request'
(Un\G4162).
0: Diagnostic information display not requested
1: Diagnostic information display requested
2: Diagnostic information display completed
Address bit Name Description
Un\G4160 b0 Cyclic transmission status This register turns ON when initial process is completed. Turns OFF when the
cyclic transmission is stopped because of an error, etc.
Off: Not performed
On: Being performed
b1 Data link status This register turns ON when the 'Data link status of each station' (Un\G4104 to
Un\G4105) is ON for even one station.
Off: All stations normal
On: One or more faulty stations
b2 Reserved station specification status This register turns ON when the 'Reserved station specification status' (Un\G4113
to Un\G4114) is ON for even one station.
Off: Not designated
On: Designated
Address bit Name Description
Un\G4162 b0 Diagnostic information display request Off: Diagnostic information display not requested
On: Diagnostic information display request

Table of Contents

Related product manuals