Mitsubishi Electric HC5000 User Manual (English)

Other manuals for Mitsubishi Electric HC5000

Questions and Answers:

J
Jeffery GomezSep 6, 2025
Why does my Mitsubishi Electric HC5000 have different color tint?
- C
  Caitlin DurhamSep 6, 2025
  When comparing images projected by two projectors, tints in the displayed images may be different because of variation between their optical components. This is not a malfunction. When comparing the image projected by this projector with those displayed on the television or PC monitor, tints in the displayed images may be different because of difference in the range of color reproducibility. This is not a malfunction.
D
David ComptonAug 25, 2025
What to do if my Mitsubishi Electric HC5000 power turns off by itself?
- J
  Johnny KelleyAug 25, 2025
  If your Mitsubishi Electric Projector turns off, this may occur when the intake vent and/or exhaust vents are blocked. Remove any obstructions, wait for the intake/exhaust fan to stop (until the STATUS indicator goes out), unplug the power cord, wait 10 minutes, plug it back in, and press the POWER button. If the STATUS indicator is steady red, replace the lamp. Also, verify that AUTO POWER OFF is set to OFF. Note that if the lamp has deteriorated, it may go out after illuminating for a while.
N
Nicholas CisnerosAug 25, 2025
Why does my Mitsubishi Electric Projector display 'NO SIGNAL'?
- L
  lpettyAug 26, 2025
  If your Mitsubishi Electric Projector displays 'NO SIGNAL', turn on the connected device and ensure it's working correctly. Check that the external device outputs signals, especially if it's a notebook computer. Verify the cable connecting the external device isn't defective and that the projector is connected using the correct terminals. Ensure the connected device is correctly selected as the input source. If using an extension cord, replace it with the supplied cable to check if images are projected correctly; if so, use an RGB signal amplifier with the extension cord.
H
holly76Aug 26, 2025
How to fix shaking images on Mitsubishi Electric Projector?
- S
  Stephanie AlvarezAug 27, 2025
  If the projected images from your Mitsubishi Electric Projector are shaking or displaced, check that the cable connected to the external device isn’t intermittent and connect the cable’s plug with the external device’s connector firmly. You can also press the AUTO POSITION button. If you still experience the issue, it may be due to out-of-spec signals from some computers; in this case, adjust the SIGNAL menu.
S
Susan MyersAug 27, 2025
How to fix blurred images on Mitsubishi Electric HC5000?
- W
  William JohnsonAug 27, 2025
  To fix blurred images on your Mitsubishi Electric Projector, adjust the focus. Clean the lens. Press the W or X button on the remote control to eliminate flicker. Adjust TRACKING and FINE SYNC in the SIGNAL menu. Adjust BRIGHTNESS and CONTRAST in the IMAGE menu. Ensure the projector and screen are perpendicular to each other.
L
Lisa RogersAug 28, 2025
What to do if my Mitsubishi Electric Projector shows a password screen?
- A
  adkinskatrinaAug 29, 2025
  If the screen for entering the password appears on your Mitsubishi Electric Projector, it means the PASSWORD FUNCTION in the FEATURE menu has been set to DISPLAY INPUT. Enter the password or contact the person in charge of management of the projector.
S
Sara GibsonSep 12, 2025
Why does my Mitsubishi Electric HC5000 Projector display “TEMPERATURE!!“?
- C
  Cheryl CooperSep 12, 2025
  If your Mitsubishi Electric Projector displays “TEMPERATURE!!”, this indication appears when the ambient temperature rises high or when the air inlet or outlet grille is blocked. Eliminate any causes of the rise in the ambient temperature. Remove any objects blocking the air inlet or outlet grille. Clean the filter, if clogged.
S
sharptoddSep 14, 2025
Why is my Mitsubishi Electric HC5000 remote control not working?
- M
  Michael HoustonSep 14, 2025
  If the remote control for your Mitsubishi Electric Projector isn’t functioning, check that the batteries are loaded correctly and are not weak. Ensure the remote control sensor isn’t exposed to direct sunlight or fluorescent light. Use the remote control within its operation range and at least 10 cm away from the projector.
M
mreyesSep 5, 2025
Why is the tint in projected images incorrect on my Mitsubishi Electric HC5000 Projector?
- M
  Marie MillerSep 5, 2025
  If the tint in projected images from your Mitsubishi Electric Projector is incorrect, check that COMPUTER INPUT in the SIGNAL menu is correctly set. Also, check that the cable connected to the external device isn’t broken.
C
crystalloganSep 2, 2025
How to fix wavy images on Mitsubishi Electric HC5000 Projector?
- K
  Kimberly RobinsonSep 2, 2025
  To fix wavy projected images on your Mitsubishi Electric Projector, securely connect the plugs of the cables to external devices. Also, keep the projector away from devices that emit interfering radio waves.

Mitsubishi Electric HC5000 Specifications

General

Resolution	1920 x 1080
Brightness	1000 ANSI lumens
Contrast Ratio	10000:1
Lamp Life	3000 hours
Projection Size	40 - 300 inches
Contrast Ratio (dynamic)	10000:1
Input Connectors	HDMI, Composite