4 DIFFERENCES IN SEQUENCE OPERATION
4.1 Stall Memory
21
4
When the stall memory reset input is used with LE-40MTA, B(-E)
In the LE7-40GU-L, the response of the automatic control output is faster than the LE- 40MTA, B(-E), and therefore there is no
problem if it is used with only stall setting without using stall memory (when the stall memory reset input is short-circuited in
the LE-40MTA, B(-E), the contacts of stall memory need not be short-circuited in the LE7-40GU-L). However, if a problem
such as a half-way stop or misalignment of winding during restarting occurs, use the output memory function of the LE7-
40GU-L.
To Next Page
Loading...
