Mitsubishi Electric LE-40MT Series - Output Gain Function

22
4 DIFFERENCES IN SEQUENCE OPERATION
4.2 Output Gain Function
4.2 Output Gain Function
The output gain function mitigates the tension fluctuation due to the moment of inertia of the reel shaft materials during
acceleration or deceleration. In the LE-40MTA, B(-E), since the control output changes either when the gain input changes
from OFF to ON or ON to OFF, tension fluctuation may occur when the gain input changes from ON to OFF. Therefore, in the
LE-30CTN(A) and LE7-40GU-L, the specifications have been changed lest that the gain input affects the control output at the
time of turning from ON to OFF. In the LE7-40GU-L, the followability of the control output itself has been improved, and
therefore the tension fluctuation has been mitigated compared to the LE-40MTA, B(-E) even when not using the output gain
function.
Model LE-40MTA, B(-E) LE-30CTN(A) LE7-40GU-L
Gain 1 or 2 turns off to on Causes a change of control outputgain 1 or 2
Gain 1 or 2 turns off to on
or on to off
Causes a change of control outputgain 1 or 2 No change
Output gain 2
Output gain 1
LE7-40GU-L
LE-30CTN
LE-40MTA(-E)
LE-40MTB(-E)
Control output
Control output
ON
ON
ON
ON