To Next Page
D
Donald BaileyAug 5, 2025
What to do if Mitsubishi Electric Control Systems shows BATALM?
- DDuane ChaseAug 5, 2025
If your Mitsubishi Electric Control Systems unit displays a BATALM error, the recommended solution is to replace the battery.
What to do if Mitsubishi Electric Control Systems shows BATALM?
If your Mitsubishi Electric Control Systems unit displays a BATALM error, the recommended solution is to replace the battery.
What to do if Mitsubishi Electric Control Systems shows PSEMG?
If your Mitsubishi Electric Control Systems unit displays a PSEMG error, you should check the cause of the emergency stop.
How to troubleshoot DCIN error on Mitsubishi Electric MELDAS 60?
If your Mitsubishi Electric Control Systems unit displays a DCIN error, you should check the 24VDC voltage.
What to do if Mitsubishi Electric Control Systems shows DCOUT?
If your Mitsubishi Electric Control Systems unit displays a DCOUT error, you should replace the power supply or control unit.
General| Control Type | CNC |
|---|---|
| Spindle Control | Yes |
| Series | 60 Series |
| Interpolation | Linear and circular |
| Display | LCD |
| Communication Interface | RS-232 |
| Memory Capacity | Varies depending on model |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to 60°C |
