Mitsubishi Electric MELSEC iQ-F Series - Page 29

2 Replacement from FX3G to FX5S
2.4 Conversion of the Projects
27
2
Operating procedure
1. Start up GX Works3.
2. Open the FX3G project.
Select [Project]  [Open Other Format File]  [GX Works2 Format]  [Open Project]  Project (***.gxw).
3. The following display is shown.
A selection screen of the following new module type is shown.
Select the new module type and press the [Execute] button.
4. When conversion is completed, the following message is shown.