6 Replacement from FX3UC to FX5UC
6.3 Selection of Substitute Models
81
6
*1 It is possible to connect to the system of FX5UC CPU module by connecting a bus conversion module (FX5-CNV-BUSC or FX5-CNV-
BUS).
*2 FX5-CCL-MS can be used as a master station.
Extension devices that can be reused when the CPU module is replaced to FX5UC
The following extension devices can be used by connecting a bus conversion module (FX5-CNV-BUSC or FX5-CNV-BUS)
even when the CPU module is replaced (FX3UC FX5UC).
■Extension devices that can be used even when the CPU module is replaced from the FX3UC
to FX5UC
*1 The terminal module can be used without connecting a bus conversion module.
*2 It is necessary to set the parameter with the PLC program.
Battery
The battery (FX3U-32BL) used in FX3UC can also be used with FX5UC.
Option FX2NC-CNV-IF FX5-CNV-IFC
FX3UC-1PS-5V FX5-C1PS-5V
FX3U-FLROM-16 No recommended substitute models Substituted by an SD memory card.
FX3U-FLROM-64 No recommended substitute models Substituted by an SD memory card.
FX3U-FLROM-64L No recommended substitute models Substituted by an SD memory card.
FX3U-FLROM-1M No recommended substitute models Substituted by an SD memory card.
FX-30P No recommended substitute models
FX0N-30EC FX5-30EC
FX0N-65EC FX5-65EC
FX2N-CNV-BC FX5-CNV-BC
Analog Positioning High-speed
counter
Network Terminal module
*1
FX3U-4AD
FX3U-4DA
FX3U-4LC
FX3U-1PG FX3U-2HC FX3U-16CCL-M
*2
FX3U-64CCL
FX3U-128ASL-M
*2
FX3U-32DP
FX-16E-TB
FX-32E-TB
FX-16EX-A1-TB
FX-16EYR-TB
FX-16EYS-TB
FX-16EYT-TB
FX-16E-TB/UL
FX-32E-TB/UL
FX-16EYR-ES-TB/UL
FX-16EYS-ES-TB/UL
FX-16EYT-ES-TB/UL
FX-16EYT-ESS-TB/UL
Extension device Recommended substitute models Special notes
Device name Model name Model name
To Next Page
Loading...
