6 Replacement from FX3UC to FX5UC
6.4 Conversion of the Projects
89
6
■Changing the Program
Change the high-speed counter program by referring to the following program example.
[Example of program]
Precautions when Using the Routine Timer
When the routine timer (T192 to T199) is used with the FX3UC, it will not operate just by switching to the FX5UC.
The routine timer must be set by the parameter. For the setting procedure, refer to the following.
■Parameter Setting Procedure of the Routine Timer
Set the use of the routine timer and the leading device number.
[Parameter] [FX5UCPU] [CPU Parameter] “Memory/Device Setting” “Device/Label Memory Area Setting”
M0
LC35
Y001
UDCNTF LC35 K10000
M0
C235
Y001
C235
K10000
Change the program.
To Next Page
Loading...
