Mitsubishi Electric MELSEC iQ-R Series - Setting for Creating Operation Log Files

49
5 GOT SETTINGS
5.2 Setting for Creating Operation Log Files
5.2 Setting for Creating Operation Log Files
Configure the settings in GT Designer3 to collect operation logs of the GOT.
For details on the operation log, refer to the following.
GT Designer3 (GOT2000) Screen Design Manual
Operating procedure
1. Select [Operation Log] to display the Environmental Setting window.
[Common]  [GOT Environmental Setting]  [Operation Log]
2. Select [Collect operation logs] and set the save destination.
Save Destination: A: Standard SD Card
Ex.