Mitsubishi Electric MELSEC iQ-R Series - Chapter 4 Programmable Controller Settings; Creating a New Project

4 PROGRAMMABLE CONTROLLER SETTINGS
4.1 Creating a New Project
24
4
4 PROGRAMMABLE CONTROLLER SETTINGS
4.1 Creating a New Project
Create a project for the CPU module.
Set the following in GX Works3.
Operating procedure
1. Create a new project.
2. Set the module configuration diagram.
[Navigation]  [Module Configuration]
Set the series to RCPU.
Set the type according to
the system configuration.
Set the required modules (base unit, power supply module,
CPU module, and information module "RD81RC96-CA")
according to the system configuration.