7 CHECKING RECORDED RECORDING FILES
7.1 Reproducing the Trouble Situation
66
7
Checking the GOT operation history (resource file viewer)
The operation logs and alarm history can be displayed in a list and confirmed from resource files recorded by the GOT.
Read resource files from the GOT before using the resource file viewer.
For how to read files from the GOT, refer to the following.
GT Designer3 (GOT2000) Screen Design Manual
1. Start offline monitoring. (Page 59 Reproducing the Trouble Situation)
2. Start the GOT offline monitor. (Page 64 Checking the GOT operation status (GOT offline monitor))
3. Configure the resource file viewer setting on the GOT offline monitor.
[Resource File Viewer] [Resource File Viewer Operation]
4. Set the resource files to be displayed and click [Start All]
*1
.
To Next Page
Loading...
