Mitsubishi Electric melsec q00ujcpu - Registration Procedure for the File Register

9 - 56
9.7.4 Registration procedure for the file register
To use a file register, register the file of the file register to the CPU module in the following steps.
Figure 9.70 Registration procedure for the file register
"PLC file" tab of the PLC parameter dialog box
File register setting
New "Device memory" window
Select "Use the following file."
Writing the file register
[Online] [Write to PLC]
Write parameters to the CPU module.
Write the file register to the CPU module.
Start
Setting a
file register
Select "Not used" or " Use the
same name as the program."
…………
…………
…………