Need help?Do you have a question about the Mitsubishi Electric MR-J5-G Series and is the answer not in the manual?
General| Brand | Mitsubishi Electric |
|---|---|
| Model | MR-J5-G Series |
| Category | Controller |
| Language | English |
Provides an overview of the troubleshooting chapter and how errors are displayed.
Lists all alarms and warnings with their respective page numbers.
Explains that safety sub-functions stop when certain alarms/warnings occur, disabling input.
Provides detailed procedures for resolving specific alarms and warnings.
Details causes and check/action methods for undervoltage alarms.
Addresses communication errors between encoder and servo amplifier during initial setup.
Covers main circuit errors, particularly ground faults in motor power cables.
Addresses errors in absolute position data or initial power-on states.
Covers overspeed alarms when servo motor speed exceeds the maximum limit.
Addresses overcurrent alarms when current exceeds the permissible limit.
Covers servo motor overheat warnings when motor temperature rises.
Covers overload warnings when load exceeds protection characteristics.
Addresses homing incomplete warnings when homing fails or is not completed properly.
Covers battery cable disconnection warnings when battery voltage decreases.
Covers troubleshooting steps when the servo motor fails to operate.
Details causes and actions for home position deviation during homing.
To Next Page