To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric PK24EK and is the answer not in the manual?
General| Brand | Mitsubishi Electric |
|---|---|
| Model | PK24EK |
| Category | Air Conditioner |
| Language | English |
Lists changes in model names for PLL, PCL, and PKL series.
Details features like installation and air flow for Series PL Ceiling Cassettes.
Explains the user-friendly microprocessor remote control features.
Details individual, group, and dual remote control system capabilities.
Provides detailed technical specifications for various series models.
Outlines the operational parameters and limits for the units.
Presents cooling capacity data for different models under varying conditions.
Details correction factors for cooling capacity based on piping length.
Graphs showing cooling capacity and power consumption for PL series.
Graphs detailing cooling capacity and power consumption for PC series.
Graphs showing cooling capacity and power consumption for PK series.
Details electrical and refrigerant circuit specifications for units.
Specifies allowable voltage ranges and standard operating conditions.
Provides dimensional drawings and layout for indoor units.
Shows dimensions and installation details for outdoor units.
Shows the refrigerant system for specific indoor/outdoor unit series.
Provides wiring diagrams for different indoor and outdoor unit models.
Outlines the main and cooling operational logic of the system.
Details the operational logic for dry mode.
Explains the overall microprocessor control system architecture and components.
Covers thermostat, frost prevention, and drain pump functions during cooling.
Explains thermostat and fan control during dry operation.
Details auto vane behavior during cooling and discharge direction selection.
Illustrates remote display and covers ON/OFF, mode, temperature, and timer functions.
Explains self-diagnostics, test runs, and air discharge selections via remote.
Details test run steps and necessary pre-checks.
Provides instructions for performing emergency operation when standard controls fail.
Explains the functions of SW17 on the remote controller for various settings.
Details the functions of SW1 on the indoor controller board for mode and vane control.
Covers protection functions and control based on outdoor coil thermistor.
Explains fan control, fixed fan output, and crankcase heater operation.
Lists error codes and their corresponding diagnoses and check points.
Provides troubleshooting steps when the outdoor unit does not work.
Details troubleshooting for wrong wiring between units and controllers.
Lists various system control functions like group, individual, and multiple remote controls.
Covers remote ON/OFF control, individual controls, and auto restart function.
Explains program timer features, connection, and usage procedures.
Specifies the part number and requirement for the timer adapter.
Details how to adjust discharge outlets for different air flow patterns.
Explains fresh air intake location, conditions, and branch duct installation.
Provides step-by-step instructions for disassembling indoor units.
Details the process for disassembling outdoor units.
Lists optional parts including refrigerant pipes, timers, and adapters.
Lists optional parts like drain pumps, finish covers, and wind baffles.
Lists panel components for PL/PLL series units with part numbers.
Lists functional and electrical components for PL/PLL series units with part numbers.
