To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric PK-2.5FLD and is the answer not in the manual?
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R410A |
| Outdoor Unit Noise Level | 48 dB(A) |
| Type | Split System |
Overview of the indoor unit's components and their roles.
Detailed technical specifications for indoor and outdoor units.
Cooling capacity and performance data under various conditions.
Physical dimensions and layout of the remote controller.
Dimensional drawings and installation points for the indoor unit.
General operational sequence from power on to mode selection.
Detailed flowchart for the cooling mode operation sequence.
Detailed flowchart for the dry mode operation sequence.
Overview of the system's control architecture and components.
Detailed control logic for the indoor unit operations.
Steps for initiating and managing emergency operational modes.
Configuration options using jumper wires and dip switches.
Using the self-diagnostic feature to identify errors.
Common issues and their potential causes and solutions.
Identifying and resolving wiring errors between units.
Procedure for safely removing the main control board.
Steps to detach and remove the auto vane motor.
Guide to disassemble and remove the fan assembly.
List of all structural components with part numbers and quantities.
List of electrical components, including part numbers and quantities.
Specifications and part numbers for optional refrigerant piping kits.
Details on the timer adapter for system control.
Identification and purpose of controls and indicators.
Wiring instructions for connecting the controller.
Wiring procedures for installing the program timer adapter.
Technical details of the program timer unit.
Explanation of the program timer's daily and weekly functions.
Step-by-step guide for connecting the program timer.
