2 - 7
2 SYSTEM CONFIGURATION
(3) Peripheral device configuration for the Q173CPU(N)/ Q172CPU(N)
The following (a) (b) (c) can be used.
(a) RS-232 configuration
RS-232 cable
(QC30R2)
Personal computer
Motion CPU module
(Q173CPU(N), Q172CPU(N))
(b) USB configuration
Motion CPU module
(Q173CPU(N), Q172CPU(N))
Personal computer
(Windows 98/2000/XP only)
USB cable
R
(c) SSCNET configuration
Motion CPU module
(Q173CPU(N), Q172CPU(N))
SSC I/F communication cable
(Q170CDCBL M,
Q170BDCBL M)
SSC I/F Card/Board
(A30CD-PCF/A 0BD-PCF)
A30CD-PCF
SSCNET
CARD
MITSUBISHI
Personal computer
(Note) : For information about GPP functions of PLC CPU, refer to the operating
manual of PLC. Also, refer to the programming manual of the operating
system for information about creating Motion programs, and refer to the help
of each software for information about operation of each programming
software package.
To Next Page
Loading...
