To Next PageTo Next PageWhat to do if cold air comes in when the Mitsubishi Electric VL-50S2-ES2-E Fan is off?
If cold air or wind comes in more than usual when the Mitsubishi Electric Fan unit is stopped, move the shutter knob to the CLOSED position.
What to do if less air is coming from my Mitsubishi Electric VL-50S2-ES2-E Fan?
If less air than normal is coming from your Mitsubishi Electric Fan unit, the outside air filter or exhaust air filter may be clogged. Clean the filter to restore normal airflow.
What to do if the front panel cannot be closed on my Mitsubishi Electric Air Conditioner?
If you're having trouble closing the front panel of your Mitsubishi Electric Air Conditioner, make sure the Lossnay core and filters are properly installed.
Why is cold air or wind coming into the room from my Mitsubishi Electric Air Conditioner?
If cold air or wind is entering the room through your Mitsubishi Electric Air Conditioner, and the fans are stopped, it may be because the shutters are open. Move the shutter knob to the CLOSE position.
Why doesn't the operation lamp illuminate on my Mitsubishi Electric Air Conditioner?
If the operation lamp on your Mitsubishi Electric Air Conditioner isn't lighting up: * Check if the LED on the display circuit board is tilted. If so, attach the LED case cover so that the LED is correctly positioned in the hole of the LED case cover. * Make sure the connector on the display circuit board is securely connected.
What to do if the operating mode (fan speed) cannot be switched on my Mitsubishi Electric Air Conditioner?
If you're unable to switch the operating mode (fan speed) on your Mitsubishi Electric Air Conditioner, check these items: * Make sure the switch with a pull cord isn't caught on anything; if it is, eliminate the cause. * Test the switch with a pull cord to see if it clicks properly. If there are issues, replace the switch.
How to fix unusual noise coming from the fans of my Mitsubishi Electric Air Conditioner?
To address unusual noises from the fans of your Mitsubishi Electric Air Conditioner: * First, check for any foreign objects around the fans and remove them. * If you notice any odd sensations when rotating the fan, consider replacing the motor. * Ensure that the Lossnay core and filters are correctly installed.
Why don't the fans rotate on my Mitsubishi Electric Air Conditioner?
If the fans on your Mitsubishi Electric Air Conditioner are not rotating, check the following: * Ensure that the connectors on the main circuit board are securely connected. * Inspect the fan blades to make sure they aren't touching other components; replace any defective parts. * Remove any foreign objects that may be obstructing the fans. * Check if the voltage 220/230/240 V AC output from the main circuit board. Disconnect the motor connector to check the output voltage.
What to do if my Mitsubishi Electric Fan has weak airflow?
If your Mitsubishi Electric Fan is not providing as much airflow as usual, it's likely that the outside air filter or exhaust air filter is clogged. Cleaning the filter should solve this problem.
Why is my Mitsubishi Electric VL-50S2-ES2-E so loud?
If your Mitsubishi Electric Fan is making more noise than usual, make sure that the panel or outside air filter is securely attached. If they are, the noise could be due to a clogged outside air filter or exhaust air filter, in which case you should clean the filter.
General| Model | VL-50S2-ES2-E |
|---|---|
| Category | Fan |
| Power consumption | Lo: 11 W, Hi: 20 W |
| Mounting | Wall-mounted |
| Operating voltage | 220-240 V |
| Operating frequency | 50 Hz |
| Voltage | 220-240 V |
| Application | Residential |
| Dimensions | 168 mm |
