K
Kathryn MurraySep 14, 2025
What to do if cold air or wind comes in more than usual when my Mitsubishi Electric Fan unit is stopped?
- FFrank PalmerSep 14, 2025
Move the shutter knob to the CLOSE position.
To Next PageTo Next PageWhat to do if cold air or wind comes in more than usual when my Mitsubishi Electric Fan unit is stopped?
Move the shutter knob to the CLOSE position.
Why is my Mitsubishi Electric Fan so noisy?
If your Mitsubishi Electric Fan is making more noise than usual, ensure that the panel or outside air filter is securely attached. If not, reattach the panel or filter. Also, a clogged outside air filter or exhaust air filter can cause noise. Clean the filter to resolve this.
How to troubleshoot a Mitsubishi Electric Fan that does not operate?
If your Mitsubishi Electric Fan unit isn't operating, check the power plug (9/10 62-E only), ensure that a breaker hasn't tripped, and verify that there hasn't been a power failure.
Why is no air coming from my Mitsubishi Electric VL-50S2?
If no air or not much air is coming from your Mitsubishi Electric Fan unit, note that the Lossnay is a heat-exchanging ventilator, so the volume of air will be lower than with an ordinary fan. This is normal.
What to do if my Mitsubishi Electric Fan unit does not operate?
If your Mitsubishi Electric Fan unit isn't working, check the power plug (9/10-62-E only). Also, verify that a breaker hasn't tripped or whether there has been a power failure.
Why is the operation lamp on my Mitsubishi Electric VL-50S2 not bright?
If the operation lamp on your Mitsubishi Electric Fan is not bright, this is not a malfunction. When the operation mode is changed from HI to LO, the lamp becomes dim.
What to do if cold air enters the room when using Mitsubishi Electric VL-50S2 Fan?
If cold air may enter inside if inside the room is in negative pressure for a reason such as that the range hood fan is operating, use the Mitsubishi Electric Fan unit in Exhaust only mode.
How to stop insects from getting inside my Mitsubishi Electric VL-50S2?
If you notice small insects getting inside your Mitsubishi Electric Fan, it's because small particles and insects may pass through. To enhance trapping efficiency, purchase a high-performance dust filter.
Why doesn't the operation lamp illuminate on my Mitsubishi Electric Air Conditioner?
If the operation lamp on your Mitsubishi Electric Air Conditioner isn't lighting up: * Check if the LED on the display circuit board is tilted. If so, attach the LED case cover so that the LED is correctly positioned in the hole of the LED case cover. * Make sure the connector on the display circuit board is securely connected.
How to fix unusual noise coming from the fans of my Mitsubishi Electric Air Conditioner?
To address unusual noises from the fans of your Mitsubishi Electric Air Conditioner: * First, check for any foreign objects around the fans and remove them. * If you notice any odd sensations when rotating the fan, consider replacing the motor. * Ensure that the Lossnay core and filters are correctly installed.
General| Model | VL-50S2 |
|---|---|
| Brand | Mitsubishi Electric |
| Category | Fan |
| Voltage | 220-240 V |
| Motor Type | AC motor |
| Reversible | No |
| Finish | White |
| Light Kit Included | No |
| Mounting | Wall |
