Eng-1
English
Mitsubishi Lossnay Ventilator
MODEL
VL-50SR2-E
(
Remote Controller Model
)
Installation Manual For Dealer and Contractor
Please ensure that the separate “Operating
Instructions” are handed over to the customer. Please
ensure that it is delivered to the customer.
■ProperinstallationisnecessaryfortheLossnayto
performatfullpotentialandtoensuresafety.Before
proceeding with the installation work, be sure to
read through these instructions.
■Theinstallationworkmustbedonebyanauthorized
dealerorqualiedcontractor.Errorsininstallation
can lead to breakdowns and accidents.
■Installationbythecustomercanleadtobreakdowns
and accidents.
■Electricalworkmustbedonebyaqualiedand
licensed electrician employed by the dealer or
contractor.
TheexplanationinthisInstallationManualismainly
forhorizontalmountingoftheproductbuttheunitcan
be mounted vertically as well.
Contents Page
1.Safetyprecautions .............................. 1
2. Dimensional outline drawing............... 3
3.Listofincludedparts........................... 3
4.Beforeinstallation ............................... 4
5. Mounting instructions.......................... 5
5.1. Wall-hole construction .................. 5
5.2.Preparationbeforeinstallation ..... 5
5.2.1Forhorizontalmounting ........ 5
5.2.2 For vertical mounting ............. 7
5.3. Attaching the main unit ................ 9
5.4.Electricalwork .............................. 10
5.5. Attaching the panel ...................... 10
5.6. Preparing the remote controller ... 11
5.7.
Installing the remote controller case
... 11
5.8. Outdoor construction ................... 12
6.Checksaftermounting........................ 13
7.Testrun ............................................... 13
Hazards created by mishandling and their
severity are indicated by the following
markers.
Warning:
This applies to mishandling or misoperation
of the product which could lead to a fatal or
serious injury.
Caution:
This applies to mishandling or misoperation
of the product which will lead to an injury or
damage to your home, household effects, etc.
1. Safety precautions
Warning
- Do not install the unit in
excessively hot areas (40°C or
more), near open ames, in areas
prone to oily smoke, or where it
could come in contact with organic
solvents.
- Fire could result.
- Do not disassemble the unit more
than necessary or modify it.
- Fire, electric shock or injury could
result.
- Do not let the unit get wet.
- Fire or electric shock could result.
Prohibited
DoNOT
disassemble.
Donotexpose
to water
To Next Page
Need help?
General
