- 49 -
6 Loading
1
5
2
6
3
7
9
4
8
10
Preparation before loading
Before loading, cool down or heat up inside of the
container to the appropriate setting temperature for
the transportation of cargoes. Cargoes must be cooled
down or heated up to the designated temperature with
other refrigeration device in advance.
• Otherwise, it may cause damages of the cargoes or
deterioration of the quality. Or it may cause emergency stop of
the refrigeration unit.
1
Cargoes must be cooled down or heated up to the designated temperature
with other refrigeration device in advance.
2
Clean inside of the container.
3
Perform the inspection of the refrigeration unit and the body*.
( Refer to page 52.)
* Check with the body manufacturer for the items to be inspected.
4
Set the right temperature for transportation of the cargo and cool down or
heat up inside of the container to the setting temperature.
( Refer to page 40.)
NOTE
●
The temperature inside of the closed container may reach 60°C under a
blazing sun. Loading in such a container causes damages or deterioration
of the quality. Be sure to cool down inside of the container to the setting
temperature before loading.
●
When it is hardly cooled down, contact your nearest dealer before loading.
To Next Page
Loading...
Need help?
General
