Need help?Do you have a question about the Mitsubishi 4G3 series and is the answer not in the manual?
General| Aspiration | Naturally Aspirated |
|---|---|
| Fuel Type | Gasoline |
| Fuel System | Multi-point fuel injection |
| Valvetrain | SOHC |
| Cooling System | Water Cooled |
| Bore x Stroke (1.5L) | 75.5 mm x 82.0 mm |
| Engine Type | Inline 4 cylinder |
Core engine data like displacement, bore, stroke, and compression ratio.
Detailed service dimensions and tolerances for critical engine components.
Torque values for fastening engine components, presented in multiple units.
Illustrated guide for removing and installing drive and timing belts, including component identification.
Diagrams and steps for removing and installing the intake manifold for different vehicle configurations.
Illustrates components and outlines steps for removing and installing the rocker arm and camshaft assembly.
Diagrams and steps for removing and installing the cylinder head and its valve train components.
Procedures for inspecting the cylinder head for leaks, damage, and checking surface flatness.
Details methods for reconditioning and replacing valve seats and guides.
Illustrates removal steps for front case, oil pump, and oil pan on engines with silent shafts.
Illustrates removal steps for front case, oil pump, and oil pan on engines without silent shafts.
Illustrates components and lists steps for removing pistons and connecting rod assemblies.
Illustrates components and lists steps for removing the crankshaft, flywheel, and drive plate.
Details crankshaft inspection, journal measurements, and oil clearance checks using plastic gauge.
Covers installation of crankshaft bearings, oil seals, and bearing caps, checking end play.
To Next Page
