Mitsubishi A1SD75M3

5 - 171
MELSEC-A
5 DATA USED FOR POSITIONING CONTROL
Setting value Default value
Storage buffer
memory address
(common for axis 1 to
axis 3)
Set with a decimal.
K
Positioning data
1 to 600
Setting value
0 1104
Set with a hexadecimal.
0000000000000000
b15 b0b4b8b12
00
Positioning identifier
0: Write
1: Do not write
Setting value
M code
Dwell time
Command speed
Stored item
Positioning data field
Setting
v
alue
Buffer
memory
Not set
Arc address
Positioning address
Target of transfer
0: Positioning data
I/F for reading
or writing is
transferred.
1: The current feed
value is transferred.
Not set
Address field
Setting value
Stored item
0: Write
1: Do not write
0000
H
1105
Set with a decimal.
K
Read/write request
Setting value
When reading/writing is completed, "0" is stored by the OS.
(Indicates that the reading/writing is completed.)
1: Read request (Set by sequence program)
2: Write request (Set by sequence program)
0 1106