5 - 180
MELSEC-A
5 DATA USED FOR POSITIONING CONTROL
Setting item Setting details
Cd.22
Manual pulse generator
enable flag
•
Set whether or not to carry out manual pulse generator operation.
Cd.23
Manual pulse generator 1
pulse input magnification
•
Set the magnification of the No. of pulses input from the manual pulse generator.
•
When setting value is 0 or less: Processed as "1"
•
When setting value is 101 or more: Processed as "100"
Cd.24
Zero point return request flag
OFF request
•
When the zero point return request flag is ON, set the request to turn this OFF
forcibly with the sequence program.
Cd.25
External start valid
•
Set whether external starting is valid.
Cd.26
Step valid flag
•
Set whether to carry out step operation.
To Next Page
Loading...
