Mitsubishi A2SHCPU (S1) User Manual

2 - 10
SYSTEM CONFIGURATION2.
(2) Utility package
(a) The following shows the applicable utility packages:
(b) The following shows the inapplicable utility package model:
SW0-SAPA(MELSAP)
POINT
(1) Old software packages other than SW3-GPPA, SW3GP-GPPA, and SW4GP-
GPPA cannot be used as the software package for system start-up for
A6GPP/A6PHP.
(2) Take caution when using a software version that selects "A0J2H" or "A1S" for
ROM writing, since the file register area of 8k points is reduced to 4k points.
To measure this, use a software package for which A1SJH/A1SH can be
selected.
SW0GHP-UTLPC-FN1 SW0GHP-UTLPC-PID SW0GHP-UTLP-FD1
SW0GHP-UTLPC-FN0 SW0C-UTLP-FN0 SW1GP-AD57P
SW0-AD57P
[1] Select "A3CPU" when a SW0GHP-UTLPC-FN1 or a SW0GHP-UTLP-
FD1 is started up.
[2] If both a SW1GP-AD57P and another utility package are used in
combination, specify "AD57P-COM" as the file name.

Mitsubishi A2SHCPU (S1) Specifications

General

Brand	Mitsubishi
Model	A2SHCPU (S1)
Category	Controller
Language	English