Mitsubishi A2SHCPU (S1) User Manual

4 - 5
CPU MODULE4.
(d) Executes the refresh processing when there is a refresh request from the
network module or link module.
Note that the AnSHCPU can enable and disable execution of link refresh by turn-
ing ON/OFF M9053 and by issuing DI/EI instructions.
(e) When the trace point setting of sampling trace is set for each scan (after END
instruction execution), stores the device status for which it is setup into the
sampling trace area.
Fig. 4.1 CPU module operation processing

Mitsubishi A2SHCPU (S1) Specifications

General

Brand	Mitsubishi
Model	A2SHCPU (S1)
Category	Controller
Language	English