Mitsubishi FB13PNT - Page 22


CHAPTER 1 CONTROLLERCHAPTER 1 CONTROLLER
1-101-10
11..77 OOuuttlliinne oe of Of Ouuttppuut ut unniitt
Output unitOutput unit
This output unit is connecteThis output unit is connected to the FC specificatiod to the FC specification model.n model.
It is the dedicated output unit for controlling the solenoidIt is the dedicated output unit for controlling the solenoid
valves. It drives the solenoid valves according to the valvevalves. It drives the solenoid valves according to the valve
control command from the logic unit. It monitors for thecontrol command from the logic unit. It monitors for the
malfunction of the solenoid valves and its condition. When amalfunction of the solenoid valves and its condition. When a
malfunction occurs, it informs to the logic unit.malfunction occurs, it informs to the logic unit.
Current characteristics of proportioning solenoid valveCurrent characteristics of proportioning solenoid valve
500929
500929
Current toCurrent to
solenoid [%]solenoid [%]
Current increasesCurrent increases
drastically as leverdrastically as lever
movement anglemovement angle
increases.increases.
100100
00
100100
Lever angle [%]Lever angle [%]
11.. OOuuttppuut t uunniit t ccaarrdd 11)) OOuuttppuut t uunniit t ccaarrd d ssiiddee
2)2) HaHarnrnesess s siside de E-E-1010
3)3) FCFC-O-OUT UT haharnrnesess sis side de E-E-1111
500930
500930
1)1)
11
2)2)
 3)3)