PROTECTIVE FUNCTIONS
173
Operation Panel Indication
PS
FR-PU04
PS
Name
PU stop
Description
A stop made by pressing the
STOP
RESET
key of the PU has been
set in Pr. 75 "PU stop selection".
Check point
Check for a stop made by pressing the
STOP
RESET
key of the
operation panel during external operation.
Corrective action
Refer to page 106.
Operation Panel Indication
Err.
Description
This alarm appears if:
•
The RES signal is on;
•
You attempted to set any parameter value in the external
operation mode;
•
You attempted to change the operation mode during
operation;
•
You attempted to set any parameter value outside its
setting range.
•
You attempted to set any parameter value during operation
(while signal STF or STR is ON).
•
You attempted to set any parameter value while parameter
write is being inhibited in Pr. 77 "parameter write inhibit
selection".
Corrective action
Perform operation correctly.
5
To Next Page
Loading...
