Mitsubishi FR-F800-E User Manual

INVERTER
INVERTER F800-E FR-F806-E-L2 INSTRUCTION MANUAL (HARDWARE)
C
INTRODUCTION
1
INSTALLATION AND WIRING
2
PRECAUTIONS FOR USE OF
THE INVERTER
3
PROTECTIVE FUNCTIONS
4
PRECAUTIONS FOR
MAINTENANCE AND
INSPECTION
5
SPECIFICATIONS
6
HEAD OFFICE: TOKYO BUILDING 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
IB(NA)-0600767ENG-C(2203)MEE Printed in Japan Specifications subject to change without notice.
FR-F800-E
FR-F806-E (IP55/UL Type 12 SPECIFICATIONS)
INSTRUCTION MANUAL (HARDWARE)
FR-F846-00023(0.75K) to 03610(160K)-E-L2
Inverter for fans and pumps

Mitsubishi FR-F800-E Specifications

General

Brand	Mitsubishi
Model	FR-F800-E
Category	Inverter
Language	English

Summary

Introduction

Product Checking and Accessories

Verify inverter model, rating plate, and included accessories to ensure correct order and intact product.

Component Names

Identify and locate various external and internal components of the inverter unit.

Related Manuals

List of supplementary manuals required for comprehensive understanding of the inverter.

Installation and Wiring

Peripheral Devices

Details on necessary external devices and their connection to the inverter for proper operation.

Inverter Installation Environment

Specifies environmental conditions required for safe and reliable inverter installation and operation.

Terminal Connection Diagrams

Visual guides for connecting power, motor, and control signals to the inverter's terminals.

Main Circuit Terminals

Explanation of main circuit terminals for power supply and motor connections.

Control Circuit

Details on control circuit terminals for input signals, output signals, and communication.

Operation Panel (FR-LU08-01)

Describes the components and basic operation of the inverter's control panel.

Communication Connectors and Terminals

Information on Ethernet, PU, and USB connectors for system communication.

Connection of Stand-Alone Option Units

Instructions for connecting optional units like brake units and converters.

Installing a Communication Option

Procedure for installing communication options like Ethernet boards.

Precautions for Use of the Inverter

Safety Instructions

Critical safety guidelines for installation, operation, and maintenance to prevent hazards.

Electro-magnetic Interference (EMI) and Leakage Currents

Discusses EMI and leakage current issues and necessary countermeasures.

Built-in EMC Filter

Explains the function and usage of the inverter's integrated EMC filter for noise reduction.

Power Supply Harmonics

Addresses power supply harmonics generated by the inverter and mitigation methods.

Power-OFF and Magnetic Contactor (MC)

Guidelines on using magnetic contactors for power control and safety.

Countermeasures against Deterioration of the 400 V Class Motor Insulation

Methods to prevent motor insulation damage due to inverter operation.

Checklist Before Starting Operation

A comprehensive pre-operation checklist to ensure correct installation and setup.

Failsafe System Which Uses the Inverter

Implementing failsafe measures using inverter status signals and external systems.

Protective Functions

Inverter Fault and Alarm Indications

Details error messages, warnings, and alarms displayed by the inverter.

Reset Method for the Protective Functions

Procedures for resetting protective functions after a fault occurs.

Faults History and the List of Fault Displays

Information on how to view past faults and a comprehensive list of fault codes.

Causes and Corrective Actions

Identifies common causes for alarms and faults with recommended corrective actions.

Precautions for Maintenance and Inspection

Inspection Item

Outlines daily, periodic, and component-specific inspection procedures.

Daily Inspection

Basic checks to perform during normal inverter operation to prevent faults.

Periodic Inspection

Scheduled checks for areas not accessible during operation.

Checking the Inverter and Converter Modules

Procedures for testing internal modules using a tester.

Replacement of Parts

Guidance on identifying and replacing parts with limited lifespan.

Specifications

Inverter Rating

Electrical and performance ratings for different inverter models.

Common Specifications

General specifications for control, operation, protective functions, and indicators.

Inverter Outline Dimension Drawings

Physical dimensions and mounting hole layouts for various inverter models.

Appendix

Appendix 1 Differences and Compatibility with the FR-F840

Comparison of features and compatibility between FR-F840 and FR-F846 models.

Appendix 2 Instructions for Compliance with the EU Directives

Information on EMC and Low Voltage Directives compliance for EU market.

Appendix 3 Instructions for UL and cUL

Guidelines for installation and safety compliance for North American standards.

Appendix 5 Restricted Use of Hazardous Substances in Electronic and Electrical Products

Compliance with regulations regarding hazardous substances in China.

Warranty

Warranty Period and Coverage

Details on the product warranty terms, coverage, and limitations.

FR-F800 Series Instruction Manual Supplement

Monitoring Terminals S1 and S2 (FR Configurator2)

How to monitor S1 and S2 terminals using FR Configurator2 software.

Digital Source (Monitor Item) Selection

Selecting digital sources for trace function and mapping them to Pr.1038-Pr.1045.