EasyManua.ls Logo

Mitsubishi FR-F800-E - Operation Panel (FR-LU08-01)

Mitsubishi FR-F800-E
143 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation panel (FR-LU08-01)
50
INSTALLATION AND WIRING
2.7 Operation panel (FR-LU08-01)
2.7.1
Components of the operation panel
The operation panel (FR-LU08-01) is an IP55 compatible model that can only be installed on the FR-F806-L2 series.
(It cannot be installed on the standard model or the separated converter type of the FR-F800 series.)
NOTE
Do not operate the keys with sharp tools.
Do not press the LCD part.
Do not peel off the waterproof seal affixed to the operation panel. If the seal is peeled off, the operation panel does not
conform to IP55.
Symbol Name Description
a Power lamp ON when the power is turned ON.
b Alarm lamp ON when an inverter alarm occurs.
c Monitor
Shows the frequency, parameter number, etc.
(Using Pr.52, Pr.774 to Pr.776, the monitor item can be changed.)
d FWD key, REV key
FWD key: Starts the forward operation.
REV key: Starts the reverse operation.
e STOP/RESET key
Stop operation commands.
Reset the inverter when the protective function is activated.
f Setting dial
Used to change the frequency and parameter settings.
Shows the details of the fault when the dial is pressed in the faults history mode.
g HAND/AUTO key Switches the operation mode between HAND (PU), HANDJOG (PUJOG), and AUTO (External).
h MON key Displays the first priority monitor. (For the details, refer to the Instruction Manual of the FR-LU08(-01).)
iMENU key
Displays the Quick menu.
Displays the Function menu when the key is pressed while the Quick menu is displayed.
j Software key (F1)
Select an operation displayed on the monitor.k Software key (F2)
l Software key (F3)
m Connector Connector to the inverter. Connect this connector to the PU connector of the inverter.
n For manufacturer setting. Do not use. Do not peel off the waterproof seal affixed to the operation panel.
o Battery cover
Remove the battery cover when replacing the backup battery for the real time clock function.
(For the details, refer to the Instruction Manual of the FR-LU08(-01).)
p Rating plate -
(a)
Front view
Rear view
(m)
(d)
(f)
(b)
(i)
(h)
(c)
(e)
(g)
(j) (k) (l)
(p)
(n)
(o)

Table of Contents

Related product manuals