Mitsubishi FR-F800-E - Appendix 7 Compliance with the UK Certification Scheme; Appendix6 Referenced Standard (Requirement of Chinese Standardized Law); Appendix7 Compliance with the UK Certification Scheme; Standardized Law)

APPENDIX
135
Appendix 6 Referenced Standard
(Requirement of Chinese
standardized law)
This Product is designed and manufactured accordance with following Chinese standards.
Machinery safety* : GB/T 16855.1
GB/T 12668.502
GB 28526
GB/T 12668.3
Electrical safety : GB/T 12668.501
EMC : GB/T 12668.3
* Only the safety stop function model meets the listed standards.
Appendix 7 Compliance with the UK
certification scheme
We declare that this product conforms with the related technical requirements under UK legislation, and
affix the UKCA (UK Conformity Assessed) marking on the product.
Approval conditions are the same as those for the EU Directives.(Refer to page 127)
UKCA marking:
The UKCA marking is used for products sold in the markets of Great Britain (England, Wales, and Scotland) from January 1, 2021 after the
departure of the UK from the EU on January 31, 2020.