OUTLINE
8
1.3.4 Removal and reinstallation of the accessory cover
"
""
"
Removal of the accessory cover
Hold down the portion A indicated by the arrow and lift the right hand side using
the portion B indicated by the arrow as a support, and pull out the accessory
cover to the right.
A
1)
B
2)
3)
"
""
"
Reinstallation of the accessory cover
Insert the mounting catch (left hand side) of the accessory cover into the
mounting position of the inverter and push in the right hand side mounting
catch to install the accessory cover.
Accessory cover
Mounting position
Catch
2)
A
1)
3)
1
To Next Page
Loading...
