Need help?Do you have a question about the Mitsubishi FR-A800 Series and is the answer not in the manual?
General| Series | FR-A800 |
|---|---|
| Category | Inverter |
| Control Method | V/F control, Vector control |
| Overload Capacity | 150% for 60 seconds |
| Communication Options | RS-485 |
| Built-in Functions | PID control |
| Protection Features | Overcurrent, overheating, phase loss, and more |
| Cooling Method | Forced air cooling (fan cooled) |
| Ambient Temperature | -10°C to +50°C (non-freezing) |
| Storage Temperature | -20 to 65°C |
| Enclosure Rating | IP20 |
| Applicable Motor Capacity | 0.4 to 630kW |
| Braking Unit | Built-in braking transistor (for models up to 75 kW), External braking resistor required |
Details revisions for the sample screen manual.
Configures controller settings for screen design software.
Sets Ethernet controller configurations for screen design software.
Configures communication settings for the FR-A800-E inverter.
Details connecting GOT and inverter using Ethernet via PLC.
Details connecting GOT and inverter using CC-Link IE Field Network.
To Next Page