1. Displays the [Station Number Switching] window.
2. Displays the station number and name for monitoring.
3. Displays the currently occurring alarm and the latest eighth alarms.
4. These are switches and lamps related to the alarm.
Inverter Reset : Resets the inverter.
Alarm All Clear : Clears all alarm history.
Inverter Alarm : Turns on when an alarm is occurring.
Press [Inverter Reset] and [Alarm All Clear] for 3 seconds to activate.
5. Switches to the [Manual Display] screen and the “Chapter 6. Protective Functions” from “Inverter
FR-A800 Instruction Manual (Detailed)” will be displayed.
6. Switches between the screens. The blue switch that indicates the currently displayed screen does not
switch the screen.
7. Switches to the previously opened screen.
8. Displays the current date and time. Touch the date and time to open the [Clock Setting] window.
9. Opens the [Language Setting] window.
・ The inverter will retain the speed and rotation set with the Operation Command screen even when the
screen is switched.
・ The alarm symbols and alarm names are displayed using object scripts. For the details on the scripts,
please refer to “5.7 Script List”.
・ When a system alarm occurs, the alarm message will appear at the lower portion of the screen. Touching
the left end of the message changes the display position of the message in the order of upper, center, and
lower. Touching the other part of the message displays the [Alarm Reset] window.
To Next Page
Loading...
