Mitsubishi FR-A800 Series - 7.3 Changing the Inverter Channel No.

80/83
BCN-P5999-1045-1a
7.3 Changing the Inverter Channel No.
In this sample, the GOT’s CH1 is connected to multiple inverters, and their status are being monitored by switching
the station number for monitoring the CH1.
When connecting inverters to the channels other than the CH1, change the settings as follows.
Open the Station No. Switching from the [Controller Setting] tree and select the CH that is being connected to the
inverter under [CH No. for Station No.Switching].
* Setting Example: When connecting the inverter to CH2
Deselect the CH that is not being
connected to the inverter.
Select the CH that is being
connected to the inverter.