Mitsubishi FR-A800 Series - 7. Others; 7.1 Connecting GOT and Inverter via PLC (Ethernet)

72/83
BCN-P5999-1045-1a
7. OTHERS
7.1 Connecting GOT and inverter via PLC (Ethernet)
This sample screen can also be used for connecting GOT2000 and MELSEC iQ-R/Q/L series PLC via Ethernet and
then connecting the PLC and the inverter via Ethernet interface unit
The setting example for connection via MELSEC iQ-R CPU and the Ethernet interface unit is as below.
7.1.1 System Configuration
*1: The SD card is used for the recipe function and document display function.
*2: The battery is used to backup the clock data and the recipe data in the SRAM user area in case of power
failures. (The battery is included as standard in the GOT.)
*3: For more details on the cable, please refer to “15.3.1 Connection to FREQROL-A800/F800” in "GOT2000
Series Connection Manual (Mitsubishi Products)".
7.1.2 GOT
7.1.2.1 System Applications that are Automatically Selected
Model: MELSEC iQ-R, RnMT/NC/RT, CR800-D*1
Type
System Application Name
Standard Function
Standard System Application
Standard Font
Japanese
Communication Driver
Ethernet Connection
Ethernet(Mitsubishi Electric), Gateway
Extended Function
Standard Font
Chinese(Simplified)
Outline Font
Gothic
Alphanumeric/Kana
Japanese(Kanji)
Chinese(Simplified)
Key Window Design Information
KANA KANJI Conversion
Recipe Display (Record List)
Document Display
*1: Change the models according to the CPU in use.
QCPU: MELSEC-Q/QS, Q17nD/M/NC/DR, CRnD-700
LCPU: MELSEC-L
Ethernet cable*3
GOT2000
・ GT27**－V(640×480)
・ Interface:
Standard I/F(Ethernet)
・ SD card *1
・ Battery (GT11-50BAT) *2
(Network No.1, Station No. 18,
IP: 192.168.3.18)
・MELSEC PLC（RCPU/QCPU/LCPU）
(Network No.1, Station No. 1, IP: 192.168.3.39)
+
・Ethernet unit
(Network No.2, Station No. 1, IP: 192.168.3.40)
Motor
・FR-A820-0.4K-E1
・Interface: Ethernet
(Network No.2, Station No. 1,
IP: 192.168.3.50)
Ethernet cable*3