81/83
7.4 Changing the Inverter Network No. and Station No.
Apply the settings below in order to change the inverter network number and station number.
7.4.1 Switches in W-12010 Station Number Switching Window
(1) Open the [Station No. Switching] under [Action List] and change the network number and station number.
(2) Change the [Constant] of the [Lamp] function to the same network number and station number that have been
changed in (1)*1.
*1 The structure of the value stored in the station number switching device is
as below.
Set the constant in hexadecimal format.
• Upper 8 bits: Network No.
• Lower 8 bits: Station No.
Example: Network No. 1 and Station No. 25
01 25
Station No.
Network No.
Enter the constant
according to the new
network number and
station number
Enter the new network
number and station
number.
To Next Page
Loading...
Need help?
General
