Mitsubishi FR-A800 Series - Batch Monitor 1 to 3 (B-12200 to 12202)

18/83
BCN-P5999-1045-1a
5.3.7 Batch monitor 1 to 3 (B-12200 to 12202)
Outline
This screen is used to monitor multiple items of the inverter at the same time.
Description
1. Displays the [Station Number Switching] window.
2. Displays the station number and name for monitoring.
3. Displays the data name and current value for monitoring items.
4. Scrolls the screen to view all the monitoring items.
5. Switches between the screens. The blue switch indicates the currently displayed screen and does not
switch the screen.
6. Switches to the previously opened screen.
7. Displays the current date and time. Touch the date and time to open the [Clock Setting] window.
8. Opens the [Language Setting] window.
Remarks
・ The inverter will retain the speed and rotation set with the Operation Command screen even when the
screen is switched.
・ When a system alarm occurs, the alarm message will appear at the lower portion of the screen. Touching
the left end of the message changes the display position of the message in the order of upper, center, and
lower. Touching the other part of the message displays the [Alarm Reset] window.
7
8
1
6
3
5
2
4