70/83 
 
6. MANUAL DISPLAY 
A manual in a PDF format can be displayed without conversion. For more details on the document display function, 
please refer to the “8.26 Placing a Document Display” in "GT Designer3 (GOT2000) Screen Design Manual". Please 
note that the language switching cannot be performed with the document display function. Therefore, in the sample 
screens, the document language is switched by changing the document ID in accordance with the selected display 
language. 
 
6.1 Preparing Document Data for Manual Display 
 
(1)  Extract a compressed file for manual display that has been downloaded from the sample screen (for GOT2000) 
page in the Mitsubishi FA website and store it directly under the SD card along with the PDFDAT folder. 
For the document ID and corresponding language, please refer to the table in (2). 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(2)  Correspondence table of document ID and display language 
Inverter FR-A800 Instruction Manual (Detailed)    English 
Inverter FR-A800 Instruction Manual (Detailed)    Japanese 
Inverter FR-A800 Instruction Manual (Detailed)    Chinese 
 
(3)  The corresponding page is displayed from the parameter screen and inverter alarm screen using the document 
display screen. 
"5. Parameter" opens from the parameter screen and "6. Protective Functions" opens from the inverter alarm 
screen.   
For the versions and pages for "Inverter FR-A800 Instruction Manual (Detailed)" at the creation of this sample 
screen, please refer to the table below. 
 
 
 
 
 
 
 
 
SD card folder configuration 
“Inverter FR-A800 Instruction Manual (Detailed)” English PDF file 
“Inverter FR-A800 Instruction Manual (Detailed)” Japanese PDF file 
“Inverter FR-A800 Instruction Manual (Detailed)” Chinese PDF file