Mitsubishi FREQROL FR-A024-1.5K

22.’ PARAMETERS Pr.W - Pr.13
1- wl Adjusting tha DC hi.oam br*dng
Dc injection braking lrequency
a DC injection bralung time
DC ifjection brsking vdlage
0 It is possiMe to adjust the “positioning on stop’
control by setting the
DC injection braking volt-
age. braking tlm, and the frequency at whkh mi~l~~T~n-n~m
braking, applied.
-; ,
W
DC dynamic braking voltage (factoly-setting) ... 6%
~TTmi~~~
I Note: When using an inverter duty motor (constant toque motor) change the setting to 4%. I
.
A CAUTlON
A Install a mechanical brake. There is no stopping toque.
1
IR13] wng tha s~ng fqtmcy
0 The starting frequency can be at in the range of
0 to 60HZ.
~ F~ancrmnO
: mwM
-66-