22.
PARAMETERS
Pr.14
-
Pr.16
s*ctinp
th.
.ppl*d
M
0
It
is possible
to
select the output characteristics
(V/F
characteristics) proper for
the
application
and the load characteristics.
f-1
(factory-setting)
r-1
For
-MI
lwque
load
IWVeprs,
-1
For
varllble
ioque
load (fans.
pmps)
t
Note:
If
the general-purpose magnetic flux control
mode
is
selected,
the
setting for this
parameter is ignored.
IKI
smingth.jogoprnfon
I.
JOS
frequency
~og
acceleram*ram
0
Jog operation
b
possible using the parameter unit.
0
In the
external
operation
mode,
jog operation is not allowed.
Note:
If
the
parameter unit
is
disconnected from the inverter during jog operatin, the inverter
(Jog operation is not allowed when
'3"
or
'4"
is set for Pr.79.)
will decelerate
to
a stop.
-67-
To Next Page
Loading...
