EasyManuals Logo

Mitsubishi FUEL User Manual

Mitsubishi FUEL
330 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
MPI <4G6> -
Troubleshooting
13A-21
Code No. P0130 Oxygen sensor (front) system <sensor
1>
Probable cause
Range of Check
D
Three minutes have been passed since the engine has been started.
D
The engine coolant temperature is approx. 80
_
C or more.
D
Engine speed is 1,200 r/min or more
D
Driving on a level surface at constant speed.
Set Conditions
D
The oxygen sensor (front) output voltage is 4.5 V or more when the sensor
output voltage is 0.2 V or less and a voltage of 5 V is applied to the oxygen
sensor (front) inside the engine-ECU.
D
Malfunction of oxygen sensor (front)
D
Open or short circuit in the oxygen sensor (front)
circuit or loose connector contact
D
Malfunction of engine-ECU <M/T>
D
Malfunction of engine-A/T-ECU <A/T>
Range of Check
D
Engine speed is 2,800 r/min or less
D
During driving
D
During air/fuel ratio feedback control
Set Conditions
D
The oxygen sensor (front) output frequency is six or less per 10 seconds on
average.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi FUEL and is the answer not in the manual?

Mitsubishi FUEL Specifications

General IconGeneral
BrandMitsubishi
ModelFUEL
CategoryAutomobile Accessories
LanguageEnglish

Related product manuals