FX
3G
/FX
3U
/FX
3UC
PLC User's Manual - Positioning Control Edition
Built-in Positioning Functions
11 Batch Data Positioning Mode (TBL Instruction)
11.4 Positioning Parameter Setting
B - 150
To read out and store the "pulse" and "frequency" changed by a display module or HMI:
1) In the "Positioning instruction setting" window of the positioning parameters, enter a check in the
"Positioning table settings will not be initialized when the PLC is powered on" check box.
2) Click on the "Read" button to read out the set data ("pulse" and "frequency") from the connected main
unit.
This is exclusively for the positioning table number with the positioning type specified.
3) At the completion of register data reading, the data file will be stored.
Enter a check.
Click the
"Read" button.
To Next Page
Loading...
