button (12)
:
To start this mode or cancel
the selection.
button (8)
or button (9)
: To show the folder or file.
button (13)
: To select the folder or file.
NOTE
l
If
no operation is performed for 10 seconds
or more or another button is operated after
the
button or button has been pressed,
searching of the desired file is cancelled.
l
If
no operation is performed for 5 seconds or
more after the file is displayed, playback
starts.
To play the same file repeatedly
E00758700093
Press the RPT button (6) to show “RPT” in the dis-
play.
To exit this mode, press the button again.
To play the files in the same folder repeatedly
E00758800094
Press and hold the RPT button (6) until you hear a
beep to show “F-RPT” in the display.
All files in the current folder are played repeatedly.
To exit this mode, press the button again.
To play a folder in random order
E00758900095
Press the RDM button (7) to show “F-RDM” in the
display.
The
audio randomly selects files from the current
folder and plays the selected files.
To exit this mode, press the button again.
To play all folders in random order
E00759000093
Press and hold the RDM button (7) until you hear a
beep to show “RDM” in the display.
The audio randomly selects files from all folders
and plays the selected files.
To exit this mode, press the button again.
To switch the display
E00759300155
The display changes as follows every time the
TEXT button (4) is pressed during playback.
Folder title → File title → Normal display
ID3 tag information
1.
Press and hold the TEXT button (4) until you
hear a beep to show “TAG” in the display.
2. The display changes as follows every time
the TEXT button (4) is pressed briefly.
Album title → Track title → Artist name →
Genre (vehicles with Bluetooth
®
2.0 inter-
face) → Normal display
NOTE
l
Press
and hold the TEXT button (4) again un-
til you hear a beep, and the tag information
display returns to the folder title display.
l
Up to 16 characters are shown in the display
at once. If the title is cut off in the middle,
press the PAGE button (5). The next charac-
ters are displayed every time this button is
pressed.
l
If no title is stored, “NO TITLE” is shown in
the display.
l
Characters that cannot be displayed are sub-
stituted by “ ”.
To play USB memory device tracks
via voice operation (vehicles with Blue-
tooth
®
2.0 interface)
E00759400130
Desired tracks can be selected and played from
your
USB memory device by “Artist”, “Album”,
“Playlist” and “Genre” using voice commands.
For information concerning the voice recognition
function or speaker enrollment function, refer to
“Bluetooth
®
2.0 interface” on page 5-51.
The playback sequence of tracks is the same as
when an iPod is connected. Refer to the “To play
iPod tracks via voice operation” on page 5-30.
For pleasant driving
5-35
5
To Next Page
Loading...
Need help?
General
